After the succes of the Tinyhawk S RTF package, the Tinyhawk 2 is here for even more fun. More power, better FPV system and the durability is better than ever.

This pack includes a TinyHawk-II, a transmitter, 2 batteries and a FPV goggle. If you like to have some more batteries, we strongly recommend the 1s Tattu or GNB lipo's found at the bottom of this page.

Tinyhawk II features compared to the Tinyhawk S

  • Brushless motors with even more power, from 15500kv to 16000kv.
  • The Tinyhawk II has a much better FPV system. With a new vtx and FPV camera on board is this set hard to beat.
  • Redesigned frame with adjustable camera options
Frame Properties:
  • Size: 75mm
  • Dry Weight: 31.2g
  • Frame Material: Polypropylene
Propeller Properties:
  • Avan TH turtlemode propeller
  • Diameter: 40mm
  • Blades: 4
  • Pitch: 31mm
  • Weight: 0.63 g
Motor Properties;
  • Stator: 8mm x 2.5mm (0802)
  • Kv: 16000kv
  • Weight: 2.5g
  • Bearing Size: Φ1.5*Φ4*2mm
  • Shaft Diameter:  Φ1.5mm
  • Propeller Mount: Press Fit Over Bell
Main PCB:
  • Flight Controller: F4(MATEKF411 firmware)
  • ESCs: 4in1 5A
  • Receiver: EMAX Tiny receiver (Compatible with Frsky D8 mode)
  • Battery Connector: JST-PH2
Camera and VTX:
  • VTX Power: 25/100/200mW
  • Channels: 37CH
  • FPV Camera: Runcam Nano 2 1/3" 700TVL CMOS
  • Smart Audio

EMAX Transporter Goggles Specifications:

  • Maximum appearance size 140×153×90(mm)
  • Weight (without battery) 398g
  • Resolution 480×272
  • Battery 1 cell 18650 lipo battery

EMAX E6 Transmitter Specifications:

  • Maximum appearance size 181×213×80(mm)
  • Weight (without battery) 211g
  • Number of channels 6 Channels
  • Transmission frequency 2.4GHz ISM Band(2400MHz~2483.5MHz)
  • Output Power 22dbm
  • Modulation GFSK
  • Battery 1 cell 18650 lipo battery

Included in package:

  • Light weight soft carry case, with carbon fiber design
  • Tiny Hawk-II indoor flying drone
  • USB High Voltage capable 4 port USB Charger for HV/nonHV
  • FPV Goggle: EMAX Transporter 40 channel
  • EMAX E6 Transmitter: 6 Channel
  • USB Cable for charging goggle, radio
  • Parts Bag
  • Phillips screwdriver
  • 2x 18650 Battery already pre-installed for the goggle and transmitter
  • 1 Set spare AVAN Tinyhawk Turtlemode 4 blade propellers.
  • 1x EMAX 450mAh 1S HV Battery
  • 1x EMAX 300mAh 2S HV Battery

Write a review

Please login or register to review

Emax TinyHawk II 75mm 1S/2S RTF kit

  • 184.95€

  • Ex Tax: 152.85€

Related Products

TBS Micro Battery Charger V2

TBS Micro Battery Charger V2

This charger is super awesome, it can charge your phone, your TinyHawk batteries and almost all othe..

22.50€ Ex Tax: 18.60€

GNB 650mAh 1S 60/120C

GNB 650mAh 1S 60/120C

This Gaoneng 650mAh lipo fits perfectly in the Emax tinyhawk and other micro quads. With the HV (hi..

4.50€ Ex Tax: 3.72€

Tattu 500mAh 1S 95C

Tattu 500mAh 1S 95C

This lipo fits perfectly in the Emax tinyhawk and other micro quads. Check specifications for ..

6.99€ Ex Tax: 5.78€

Emax TinyHawk II Spareparts

Emax TinyHawk II Spareparts

Spareparts for the TinyHawk 2. Those are original parts from Emax.Propellers turtlemode (picture 1-5..

3.25€ Ex Tax: 2.69€

GNB 520mAh 1S 80C

GNB 520mAh 1S 80C

This Gaoneng 520mAh lipo fits perfectly in the Emax tinyhawk and other micro quads. With the HV (hi..

4.00€ Ex Tax: 3.31€

Tags: Emax TinyHawk II 75mm 1S/2S RTF kit, Ready to fly

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.