Many many people asked us for this, after some hard work we managed to get the TinyHawk-S in a RTF pack! The stronger, more futureproof version of the legacy white TinyHawk. We prodly present this inimini beast! In the Netherlands we got a specrace at "the Post Office"

This pack includes a TinyHawk-S, a transmitter and a goggle. The only thing you need are some flight batteries, we strongly recommend the 1s Tattu lipo's found at the bottom of this page.


Tinyhawk S features compared to the Tinyhawk

  • Newly engineered brushless motor that is smaller in scale in order to reduce weight, but also be able to spin at higher RPMs, increasing the power output of the entire aircraft.
  • Utilizing this new power system, up to 20% more flight time as well as the ability to accept a higher voltage.
  • Tinyhawk S featuring a dual slot mount for the battery and you can also tilt the camera to your preference.
  • Newly reinforced struts.
Frame Properties:
  • Size: 75mm motor to motor L 110mm x W 95mm x H 39mm
  • Dry Weight: 30g
  • Frame Material: Polypropylene
Propeller Properties:
  • Avan TH turtlemode propeller
  • Diameter: 40mm
  • Blades: 4
  • Pitch: 31mm
  • Weight: 0.63 g
Motor Properties;
  • Stator: 8mm x 2.5mm (0802)
  • Kv: 15500kv
  • Weight: 2.5g
  • Bearing Size: Φ1.5*Φ4*2mm
  • Shaft Diameter:  Φ1.5mm
  • Propeller Mount: Press Fit Over Bell
Main PCB:
  • Flight Controller: F4(MATEKF411 firmware)
  • ESCs: 4in1 5A
  • Receiver: EMAX Tiny receiver (Compatible with Frsky D8 mode)
  • Battery Connector: JST-PH2
Camera and VTX:
  • VTX Power: 25mw
  • Channels: 37CH
  • Camera Properties: 600TVL CMOS
  • Smart Audio


EMAX Transporter Goggles Specifications:

  • Maximum appearance size 140×153×90(mm)
  • Weight (without battery) 398g
  • Resolution 480×272
  • Battery 1 cell 18650 lipo battery


EMAX E6 Transmitter Specifications:

  • Maximum appearance size 181×213×80(mm)
  • Weight (without battery) 211g
  • Number of channels 6 Channels
  • Transmission frequency 2.4GHz ISM Band(2400MHz~2483.5MHz)
  • Output Power 22dbm
  • Modulation GFSK
  • Battery 1 cell 18650 lipo battery


Included in package:

  • Light weight soft carry case, with carbon fiber design
  • Tiny Hawk-S indoor flying drone
  • USB High Voltage capable 4 port USB Charger for HV/nonHV
  • FPV Goggle: EMAX Transporter 40 channel
  • EMAX E6 Transmitter: 6 Channel
  • USB Cable for charging goggle, radio
  • Parts Bag
  • Phillips screwdriver
  • 2x 18650 Battery already pre-installed for the goggle and transmitter
  • 1 Set spare AVAN Tinyhawk Turtlemode 4 blade propellers.

Write a review

Please login or register to review

Emax TinyHawk-S 75mm RTF

  • 179.95€

  • Ex Tax: 148.72€

Related Products

Emax TinyHawk-S 75mm Spareparts

Emax TinyHawk-S 75mm Spareparts

Spareparts for the TinyHawk-S. Those are original parts from Emax.Propellers turtlemode (1st, 2nd pi..

3.25€ Ex Tax: 2.69€

Emax 300mAh 2S HV 30C MCPX

Emax 300mAh 2S HV 30C MCPX

This is the original 2S lipo from Emax, this pack is lightweight and designed to work together with ..

10.90€ Ex Tax: 9.01€

Tattu 450mAh 1S 95C

Tattu 450mAh 1S 95C

This lipo fits perfectly in the Emax tinyhawk and other micro quads. With the HV (high voltage) lip..

7.45€ Ex Tax: 6.16€

Tags: Emax TinyHawk-S 75mm RTF, Ready to fly

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.